plantMANAGER LT HVAC: Heat pump acquirer

plantMANAGER LT HVAC: Heat pump acquirer

plantMANAGER LT HVAC

plantMANAGER LT HVAC

Danfoss FC51 inverter integrated into plantMANAGER system

Danfoss FC51 inverter integrated into plantMANAGER system

The drivers for communication with the DANFOSS model FC51 inverter, used for modulating fans and compressors in air conditioning and refrigeration applications, have been added to our plantMANAGER remote control system. Protocol used MODBUS RTU. For more information: plantmanager@criotherm.com
NABLA PRO, CTA PROFESSIONAL user remote touch-screen interface

NABLA PRO, CTA PROFESSIONAL user remote touch-screen interface

Available on control systems for CTA PROFESSIONAL air handling units in wall or built-in versions (KITCHENS application). Main page, kitchen version Main page, conditioning version Alarm page Set-point change page Time band change page Instructions are available on the NABLA PRO page for using the remote touch-screen interface (wall or built-in versione for kitchen applications)...
plantMANAGER New graphics and gallery

plantMANAGER New graphics and gallery

New graphic design of the site and new image galleries for our plantMANAGER applications. Thanks to the immediate and more accessible division by sector, it is even easier to browse through the images of our supervision and remote control systems. Visit the website www.plantmanager.it to see all the image galleries!
MODBUS TCP/IP on CTA COMPACT+ systems

MODBUS TCP/IP on CTA COMPACT+ systems

On the control systems for CTA COMPACT+ air handling units, an interface to BMS systems with MODBUS TCP/IP protocol is now available. For more information, contact our sales offices.
Heat meter

Heat meter

We have added to our plantMANAGER remote control system the drivers for communicating with the KAMSTRUP counters model MULTICAL 403, 602 and 6M2. In this way the system is able to acquire energy consumption data (heating, cooling) and make them available for analysis, statistics and system reports. For more information: plantmanager@criotherm.com
plantMANAGER: interfacing with DAIKIN systems

plantMANAGER: interfacing with DAIKIN systems

A new driver has been added to our plantMANAGER remote control system: DAIKIN DIII-net EKMBDXA modbus interface. Now it’s possible to connect to the Split, Sky Air, VRV, refrigerators and DAIKIN air handling units.   The complete features on our plantMANAGER page.  
CTA COMPACT+ revision 05d

CTA COMPACT+ revision 05d

The new version of the CTA COMPACT+ applicative software for management of air handling units is now available.   Now is possible to manage an electric heating coil with PWM and water action with ON-OFF action (as well as modulating 0..10 V), in double fan applications (extraction and delivery) typical of the kitchen sector.  ...
CZ+DOCS

CZ+DOCS

Simplified access APP to online documentation!   View and share all the documents of your projects, organized by order number and year. In addition to browsing through the folders, you can search directly by the number and year of the order. Photograph the QR code associated with the order code to quickly access your files:...
CTA COMPACT+ revision 05C

CTA COMPACT+ revision 05C

The new version of the CTA COMPACT+ applicative software for management of air handling units is now available.   The functionalities introduced are:   with automatic ventilation, setting the fan steps number at 3 or 9 step with manual ventilation, setting the fan steps number at 3 or 9 step possibility to assign the management...
MCE 2018: thank you

MCE 2018: thank you

 CRIOTHERM ZETA PLUS thanks all those who during the period of the trade show took time out to visit our stand.
MCE 2018

MCE 2018

CRIOTHERM ZETA PLUS awaits you in Milan at the 41st edition of MCE 2018 – Mostra Convegno Expocomfort, the biennial trade show, world leader in residential/service sector and industrial installations, in air conditioning and renewables, in calendar from 13 tol 16 March 2018.   You will be able to find us in Pavilion 15, Stand...
Inverter ABB ACH580

Inverter ABB ACH580

The applicative software CTA PROFESSIONAL drivers for the management of the ACH580 VFD/inverter, employed and proposed for fan management, have been introduced.   The main characteristics of the ACH580 VFD/inverter:: protection grade IP 55 EMC filters in class C2/C3 ( 1st room with obligation of start-up testing /unlimited industrial) compliant with EN 61800-3:2004+A1:2012 DC side...
plantMANAGER applications

plantMANAGER applications

As of today we have a gallery of several plantMANAGER applications implemented in a diversity of sectors.   www.plantmanager.it
NRG+ Energy Monitoring

NRG+ Energy Monitoring

Monitoring solutions orientated towards plant energy saving and increasing energy efficiency, whose combination is on the basis of the specific requirements.   Control unit with applicative software for data acquisition from:: Electrical energy meters Heat energy meters Gas meters Water meters Probes and transducers for environmental parameters (temperature, humidity, CO2, etc.)   Ample range of...
CTA PROFESSIONAL - Touch Screen

CTA PROFESSIONAL – Touch Screen

New update of the TOUCH-SCREEN interface for applications of the CTA PROFESSIONAL line, introducing the TREND page.     Two pages for the visualisation of the trends over time of the values of greater interest (Temperatures, Humidities) are available and others can be introduced on request in order to permit a precise analysis of the...
T/TH probes for outdoor usage

T/TH probes for outdoor usage

CRIOTHERM ZETA PLUS proposes a new series of probes for outdoor usage for the measurement of temperature and humidity, which thanks to their structure render the values detected independent of atmospheric events (rain, solar radiation, wind, etc.). These probes are available in a 0..10 V / 4..20 mA 0..10 V / 4..20 mA analogue version...
3 speed fan management

3 speed fan management

Despite the market tendencies which go in the direction of continuous control of air flows (VFD/inverter, brushless), in low-cost applications and in plant revamping one can find motors with 3 speed operation.   For this purpose, CRIOTHERM ZETA PLUS proposes a conversion module 0..10 V with 3 relays, having the following characteristics: 4 DIN format...
Modules for the management of air flow

Modules for the management of air flow

As of today a module is available for the management of air flow wherever control information coming from multiple discrete sources (switches, pressure switches, etc.) is available. Designed for installation on DIN (4 modules) guide rails, it has a 230 Vac electrical supply.   Amongst the main characteristics: Up to 5 digital inputs Output for...
CTA COMPACT+ revision 03B

CTA COMPACT+ revision 03B

The new version of the CTA COMPACT+ applicative software for management of air handling units is now available.   The functionalities introduced are: Digital outputs Heating/Cooling on expansion 2 new digital inputs for signalling dirty filters Air quality (CO2/VOC) probe management and related renewals Digital input for an alarm signal for lack of air flow...
After-heating module

After-heating module

As of today the module for the management of AFTER-HEATING sections, remote from the central air handling unit, is available   RDesigned for installation on a DIN (4 modules) guide rail, its has 230 Vac electrical supply and is connected via serial RS485 with the PROFESSIONAL series main control unit.   Amongst the main characteristics:...
CTA PROFESSIONAL – EC Fans

CTA PROFESSIONAL – EC Fans

Release of the new versions of our applications of the PROFESSIONAL line for the management of air handling units with updating of the management functionalities of brushless fans from ZIEHL ABEGG and EBM PAPST: Up to 2 fans per section of air handling (return, supply) Watch-dog in the case of lack of serial communication Manual...
CTA PROFESSIONAL – Protocols

CTA PROFESSIONAL – Protocols

Our PROFESSIONAL series applications for the control of air handling units permit the integration in BMS (building management systems) thanks to the communication protocols: MODBUS RTU (RS485) MODBUS TCP/IP KNX BACNET MS/TP (RS485) BACNET IP LONWORKS       For further information please contact our sales department. The complete characteristics are to be found on...
CTA COMPACT+

CTA COMPACT+

The new application software for the management of air handling units CTA COMPACT+ is now available.. Amongst the main characteristics: Compact control unit 4 din supply 230 V with possible expansion Availability of RS485 MODBUS interface Remote display with integrated T/TH probe               The complete characteristics are to be...
MCE 2016

MCE 2016

CRIOTHERM ZETA PLUS thanks all those who during the period of the trade show took time out to visit our stand.  
New website

New website

From today the new website is available: apart from the overview of the products and services offered, news and link at the new protected access area for those end-users with a service contract.   www.criotherm.com